Zoom
Pair of quality RDA780D grooved and dimpled performance front disc rotors to suit various Toyota 4WD Hilux models 1985 on:
Toyota | 4 Runner | LN61 | 1984-1989 | 2.4 D |
Toyota | 4 Runner | LN61 | 1984-1989 | 2.8 D |
Toyota | 4 Runner | LN130R | 1989-1995 | 2.8 D |
Toyota | 4 Runner | RN130R | 1991-1996 | 2.4 |
Toyota | 4 Runner | VZN130R | 1989-1995 | 3.0 i |
Toyota | 4 Runner | YN130 | 1989-1995 | 2.2 i |
Toyota | 4 Runner | YN63 | 1984-1989 | 2.2 |
Toyota | 4 Runner | YN63 | 1984-1989 | 2.2 i |
Toyota | 4 Runner | YN63 | 1984-1989 | 2.4 |
Toyota | Hilux | LN106R | 1988-1997 | 2.8 D |
Toyota | Hilux | LN107R | 1992-1997 | 2.8 D |
Toyota | Hilux | LN111R | 1988-1997 | 2.8 D |
Toyota | Hilux | LN167R | 1997-2005 | 3.0 D |
Toyota | Hilux | LN172R | 1997-2005 | 3.0 D |
Toyota | Hilux | RN105R | 1988-1997 | 2.4 |
Toyota | Hilux | RN106R | 1990-1997 | 2.4 |
Toyota | Hilux | RN110R | 1988-1997 | 2.4 |
Toyota | Hilux | RZN169R | 1997-2002 | 2.7 i |
Toyota | Hilux | RZN174R | 1997-2002 | 2.7 i |
Toyota | Hilux | VZN167R | 2002-2006 | 3.4 i |
Toyota | Hilux | VZN172R | 2002-2006 | 3.4 i |
*Excludes Surf models*
The RDA Grooved and Dimpled Brake Rotor
Want better braking performance?
- Want enhanced brake safety?
- Want to improve the look of your alloy wheels?
- Want all this without costing an arm and a leg?
Rotors & Drums Australia ( RDA) offers the largest range of performance brake rotors available in Australia.
RDA Grooved and dimpled rotors provide a cost effective solution to improve the stopping performance
of any make or model of motor vehicle with the following engineered characteristics:
- Increased dissipation of water, dust and road grime from the contact area of your braking system.
- Improved integrity of the pad and rotor surface, through deglazing of the contact area.
- Directional slotting surface also combats âout-gassing" which is caused by gas from the brake pad bonding agent forming a cushion between your pad and rotor and thereby reducing pad âbite".
mm | ||
Type | Vented | |
A = Diameter | 289 | |
B = Original Height | 64.5 | |
C = Original Thickness | 20 | |
D = Min Thickness ie Replacement | 18 | |
E = Centre hole | 100 | |
F = No of bolt holes | 6 | |